CS10.481

C-Line

Fig. 12-1 Front side

A

Input Terminals (screw terminals)

N, L

Line input

PE (Protective Earth) input

B

Output Terminals (screw terminals, two pins per pole)

+

Positive output

–

Negative (return) output

C

Output voltage potentiometer

Open the flap to adjust the output voltage. Factory set: 24.1V

D DC-OK LED (green)

On, when the voltage on the output terminals is >21V

Jul. 2015 / Rev. 2.0 DS-CS10.481-EN

All parameters are specified at 48V, 5A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

13/26