This document is proprietary. Any dispatch or disclosure of content is authorized only after written authorization by PULS GmbH.

All parameters are specified at 400V, 2.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

Specification: SP-PAS395 Rev: 3.1

Date: 2013/01/19

6-14

5

General Data

Efficiency:

typ. 94.4 %

at 400Vdc output voltage, 2.6A output current and 230Vac input

voltage.

Full-load Power Losses:

typ. 60.8W at 400Vdc output voltage and 2.6A output current

No-load Power Losses:

typ. 12 W at 360Vdc output voltage

typ. 13 W at 400Vdc output voltage

typ. 15 W at 460Vdc output voltage

6

Charging Performance

The charger is suitable to charge capacitors up to 5F. The typical capacitance is considered to

be 2F. Therefore, most of the following curves and investigations apply for this size of capacitor

unless otherwise stated.