GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9021-60293 Rev. C page 2 of 2

www.gamewell-fci.com

Options:

GFANN-80

Remote annunciator with 80 charac-

ter, backlit LCD which mimics the

FACP display. Also provides status

indicators for AC Power, Alarm, Trou-

ble, Supervisory and Alarm Silenced

conditions. Packed in its

own enclosure.

GFANN-RLY

Relay module provides 10 Form-C

relays. Mounts in FACP.

CAC-5X

Class A conversion module used to

convert Class B (Style B) IDCs to

Class A (Style D) and Class B (Style

Y) NACs to Class A (Style Z). Mounts

in FACP. Two required for GF510.

4XTMF

Transmitter module provides output

for the local energy municipal box

transmitter and the alarm and trouble

reverse polarity. Mounts in FACP.

Specifications

AC Power:

120 VAC, 60Hz, 3.8 A

Supervised, non power-limited

Battery:

Max. charging circuit:

27.6 VDC@ 1.4A

Max. Charger

Capacity:

26 Ah

(two 18 Ah batteries fit inside FACP)

Initiating Device:

Alarm zones 1 - 5 (Flex 505/

Flex 510)

Circuits (IDC):

Alarm zones 6 - 10 (Flex 510 only)

All zones Class B (Style B)

Supervised, Class 2 Power-Limited

circuitry

Operating Voltage: nominal 20 VDC

Alarm Current:

15 mA minimum

Short Circuit

Current:

40 mA maximum

Standby Current:

2 mA

Maximum Loop

Resistance:

100 ohms

Notification:

Four NACs, Class B (Style Y)

Circuits (NAC):

Supervised, Class 2, Power-Limited

circuitry

Operating Voltage: nominal 24 VDC

Maximum

Signaling Current: 7.0 A (3.0 A maximum per NAC)

Maximum Wiring

Voltage Drop:

2 VDC

Form-C Relays:

Programmable (factory setting:

Trouble, Alarm, Supervisory)

Contact Ratings:

2 A @ 30 VDC (resistive)

0.5 A @ 30 VAC (resistive)

Resettable

Operating Voltage: nominal 24 VDC

Power:

Class 2 Power-Limited circuitry

Maximum

Available Current: 500 mA

Non-Resettable

Operating Voltage: nominal 24 VDC

Power:

Class 2 Power-Limited circuitry

Maximum

Available Current:

500 mA

Remote Sync:

24 VDC nominal, max. current: 40 mA

Cabinet-Door:

19.3" x 16.8" x 0.3" (

49 x 43 x 1 cm)

Backbox:

19" x 16.6" x 5.2"

(48 x 42 x13 cm)

Features (Continued)

•

Panel LED annunciating indicators (visible to public)

- Fire Alarm (red)

- AC Power (green)

- Supervisory (yellow)

- Trouble (yellow)

- Alarm Silenced (yellow)

•

Local FACP piezo sounder differentiates Alarm,

Trouble, Maintenance, and Supervisory.

•

Membrane key panel (visible when panel door open):

- 25 keys, including a 16 alpha-numeric keypad.

- Function: ACK/STEP, SILENCE, DRILL, RESET.

- Service/programming: phone keys, cursor, enter, etc.

•

256 Event History Log.

•

24 volt operation with low AC voltage sense.

•

Automatic battery charger with supervision.

•

Built-in FLPS-7 power supply (7.0 A total current).

•

Silent or audible walk test capabilities.

•

Alarm verification and positive alarm sequence (PAS).

•

Piezo sounder for Alarm, Trouble, and Supervisory.

•

Built-in 4-conductor communication bus (ANN-BUS) to

connect remote annunciators, and printer, LED, and

relay modules.

•

Optional trim ring.

Ordering Information

GF505

Flex 505 conventional FACP, 5 zones,

120 VAC, w/ FLPS-7 power supply, red

GF510

Flex 510 conventional FACP, 10 zones,

120 VAC, w/ FLPS-7 power supply, red

71252

EOL resistor, 4.7K ohm, ½ watt

53164

GF505 & GF510 Series I/O Manual

Options:

GFANN-80

Remote annunciator, LCD, red

GFANN-80W

Remote annunciator, LCD, white

GFANN-LED

LED annunciator module;

yellow and red LEDs

GFANN-RLY

Relay module, 10 Form-C relays

CAC-5X

Class A converter for IDCs & NACs

(2 for Flex 510)

4XTMF

Transmitter module for remote station

output or municipal box connection

TR-CE

Trim ring for semi-flush mount, red

ANN-SB80KIT-R Backbox kit, surface mount used with

ANN-80, red

ANN-

SB80KIT-W Backbox kit, angled for better viewing,

surface mount used with the N-ANN-80

(-W), white

ANN-MBRLY

Optional mounting bracket (ANN-RLY)