114-1008

Rev K1

2 of 11

2.3. Drawings

Customer Drawings for product part numbers are available from the service network. If there is a conflict

between the information contained in the Customer Drawings and this specification or with any other technical

documentation supplied, the information contained in the Customer Drawings takes priority.

2.4. Specifications

Product specifications (108-series) provides product performance and test results. Specifications available for

this product are:

108-1025

.058 Diameter PC Board Disconnect System

108-1059

.093 Diameter PC Board Disconnect System

2.5. Instructional Material

Instruction sheets (408-series) provide product assembly instructions or tool setup and operation procedures.

Instruction sheets available that pertain to this product are:

408-7345

Hand Crimping Tool 90135-2

408-7698

Hand Crimping Tool 90314-1

408-7850

Hand Crimping Tool 90131-4

408-7914

Hand Crimping Tool 90205-2

408-7951

Hand Crimping Tool 90204-4

408-7963

Application and Maintenance for Hand Crimping Tool 90221-2

408-8025

Miniature Quick-Change Applicator (Side Feed Type)

408-8039

Heavy Duty Miniature Quick-Change Applicators (End-Feed Type) with Mechanical or Air

Feed Systems

408-8040

Heavy Duty Miniature Quick-Change Applicators (Side-Feed Type) with Mechanical or Air

Feed Systems

409-5128

AMP-O-LECTRIC*

Model “K” Terminating Machines 471273-[ ]

409-5842

AMP-O-

LECTRIC Model “G” Terminating Machines 354500-[ ]

409-10047 AMP 3K* Terminating Machines 1725950-[ ] and AMP 5K* Terminating Machines 1725900-[ ]

409-10089 AccuSerter 2 Insertion Machines 1976500-[ ]

409-10093 Pin-Barrel Insertion Module 2031100-1

409-10204 AMP 3K/40* 2161400-[ ] CE Terminating Machines and AMP 5K/40* 216500-[ ] CE

Terminating Machines

3. REQUIREMENTS

3.1. Safety

Do not stack product shipping containers so high that the containers buckle or deform.

3.2. Storage

Ultraviolet Light

Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the product

material.

Shelf Life

The product should remain in the shipping containers until ready for use to prevent deformation to

components. The product should be used on a first in, first out basis to avoid storage contamination that

could adversely affect performance.