1 of 11

© 2016 TE Connectivity family of companies

All Rights Reserved

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

Application Specification

114-1008

16 DEC 16

Rev K1

NOTE

All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].

Unless otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. Figures and

illustrations are for identification only and are not drawn to scale.

1. INTRODUCTION

This specification covers the requirements for application of .058 and .093 diameter pc board pins and

disconnect receptacle contacts. The pins are available in solid or formed press-fit and clinch fit. The pins

feature a pin body, bead, and cutoff tab. The bead ensures proper insertion depth of the pin when inserted into

the pc board. The clinch fit pin has legs that clinch the pc board for stability. The receptacle contact features a

wire barrel with serrations, insulation barrel, and mating barrel. The pin must be soldered to the pc board and

the receptacle contact must be crimped onto wire. The pin and receptacle contact mates for quick disconnect of

single-circuit wire-to-board connections.

The pins and receptacle contacts are available in loose pieces for application using hand tools and strip form

for application using semi-automatic and automatic machines.

When corresponding with personnel, use the terminology provided in this specification to facilitate inquiries for

information. Basic terms and features of this product are provided in Figure 1.

Figure 1

2. REFERENCE MATERIAL

2.1. Revision Summary

Revisions to this application specification include:



Updated specification to corporate requirements

, and corrected wire sizes in Paragraph 3.6



Modified documents in Paragraph 2.5, and modified tooling in Section 5

2.2. Customer Assistance

Reference Product Base Part Number 61137 and Product Code 1330 are representative of .058 and .093

diameter pc board pins and disconnect receptacle contacts. Use of these numbers will identify the product line

and help you to obtain product and tooling information. Such information can be obtained through a local

Representative, by visiting our website at www.te.com, or by calling PRODUCT INFORMATION or the

TOOLING ASSISTANCE CENTER at the numbers at the bottom of this page.

.058 and .093 Diameter

Printed Circuit (PC) Board Pins and

Disconnect Receptacle Contacts

Receptacle Contact

Press-Fit Pin

Pin Body

Clinch Fit Pin

Bead

Insulation

Barrel

Wire Barrel

with Serrations

Mating

Barrel

Wire Barrel

with Serrations

Cutoff Tab

Legs