MP7541B

4

Rev. 2.00

ELECTRICAL CHARACTERISTICS (CONT’D)

NOTES:

Specifications are subject to change without notice

1

Full Scale Range (FSR) is 10V for unipolar mode.

2

Guaranteed but not production tested.

3

Specified values guarantee functionality. Refer to other parameters for accuracy.

0 to +17 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Digital Input Voltage to GND

. . . .

. . . . . . . . . . .

+25 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

+25 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage Temperature

–65

. . . . . . . . . . . . . . . . .

Lead Temperature (Soldering, 10 seconds)

+300

. . . . . .

Package Power Dissipation Rating to 75

CDIP, PDIP, SOIC

850mW

. . . . . . . . . . . . . . . . . . . . . . . . .

Derates above 75

11mW/

. . . . . . . . . . . . . . . . . . . . .

NOTES:

1

Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a

stress rating only and functional operation at or above this specification is not implied. Exposure to maximum rating

conditions for extended periods may affect device reliability.

2

Any input pin which can see a value outside the absolute maximum ratings should be protected by Schottky diode clamps

(HP5082-2835) from input pin to the supplies.

All inputs have protection diodes which will protect the device from short

transients outside the supplies of less than 20mA for less than 100

APPLICATION NOTES

Refer to Section 8 for Applications Information

PERFORMANCE CHARACTERISTICS

Graph 1. Linearity Error vs.

Digital Input Code