STM32L476RG datasheet(145/232 Pages) STMICROELECTRONICS

145 / 232 page

DocID025976 Rev 4

145/232

STM32L476xx

Electrical characteristics

207

Output voltage levels

Unless otherwise specified, the parameters given in the table below are derived from tests

performed under the ambient temperature and supply voltage conditions summarized in

Table 22: General operating conditions. All I/Os are CMOS- and TTL-compliant (FT OR TT

unless otherwise specified).

Input/output AC characteristics

The definition and values of input/output AC characteristics are given in Figure 23 and

Table 60, respectively.

Unless otherwise specified, the parameters given are derived from tests performed under

the ambient temperature and supply voltage conditions summarized in Table 22: General

operating conditions.

Table 59. Output voltage characteristics(1)

Symbol

Parameter

Conditions

Min

Max

Unit

VOL

Output low level voltage for an I/O pin

CMOS port(2)

|IIO| = 8 mA

VDDIOx ≥ 2.7 V

-0.4

VOH

Output high level voltage for an I/O pin

VDDIOx-0.4

VOL(3) Output low level voltage for an I/O pin

TTL port(2)

|IIO| = 8 mA

VDDIOx ≥ 2.7 V

-0.4

VOH(3) Output high level voltage for an I/O pin

2.4

VOL(3) Output low level voltage for an I/O pin

|IIO| = 20 mA

VDDIOx ≥ 2.7 V

-1.3

VOH(3) Output high level voltage for an I/O pin

VDDIOx-1.3

VOL(3) Output low level voltage for an I/O pin

|IIO| = 4 mA

VDDIOx ≥ 1.62 V

-0.45

VOH(3) Output high level voltage for an I/O pin

VDDIOx-0.45

VOL(3) Output low level voltage for an I/O pin

|IIO| = 2 mA

1.62 V ≥ VDDIOx ≥ 1.08 V

-0.35ₓVDDIOx

VOH(3) Output high level voltage for an I/O pin

0.65ₓVDDIOx

VOLFM+

(3)

Output low level voltage for an FT I/O

pin in FM+ mode (FT I/O with "f"

option)

|IIO| = 20 mA

VDDIOx ≥ 2.7 V

-0.4

|IIO| = 10 mA

VDDIOx ≥ 1.62 V

-0.4

|IIO| = 2 mA

1.62 V ≥ VDDIOx ≥ 1.08 V

-0.4

1. The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in Table 19:

Voltage characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins) must always

respect the absolute maximum ratings ΣIIO.

2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52.

3. Guaranteed by design.

STM32L476RG 数据表(PDF) 145 Page - STMicroelectronics

STM32L476RG 数据表(HTML) 145 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

STM32L476RG 数据表(PDF) 145 Page - STMicroelectronics

STM32L476RG 数据表(HTML) 145 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载