AMS00x • Embedded Bluetooth Low Energy Solution

Electrical Specifications, Section 3

ADS-MS00x-107R • Preliminary Data Sheet

Page | 3

©2014-2015 ACKme Networks. http://ack.me

September 14, 2015

3 Electrical Specifications

3.1 Absolute Maximum Ratings

CAUTION! The absolute maximum ratings in Table 1 and Table 2 indicate levels where permanent damage to the de-

vice can occur, even if these limits are exceeded for only a brief duration. Functional operation is not guaranteed un-

der these conditions. Operation at absolute maximum conditions for extended periods can adversely affect long-

term reliability of the device.

Table 1. Absolute Maximum Voltage Ratings

Symbol

Ratings

Min.

Max.

Unit

DC supply voltage applied to VDD pin

GND - 0.3

3.8

V

Voltage on input or output pin

GND - 0.3

V

Table 2. Absolute Maximum Environmental Ratings

Characteristic

Note

Min.

Max.

Unit

Storage Temperature

–

-40

+125

°C

Relative Humidity

Non-condensing (storage)

–

65

%

3.2 Recommended Operating Conditions

Functional operation is not guaranteed outside the limits shown in Table 3 and Table 4, and operation outside these

limits for extended periods can adversely affect long-term reliability of the device.

DC Operating Conditions

Table 3. Recommended DC Operating Conditions

Symbol

Min.

Typical

Max.

Unit

VDD

DC supply voltage applied to VDD pin

On-board serial flash read-only

1.8

–

3.63

V

On-board serial flash read and write

2.1

–

3.63

V

On-board serial flash at power-on

–

3.63

V

Notes:

1. Overall performance degrades beyond minimum and maximum supply voltages.

2. The module may fail to boot if this condition is not met when power is initially applied.