AMS001-R datasheet(18/29 Pages) SILABS

18 / 29 page

AMS-00x • Embedded Bluetooth Low Energy Solution

Regulatory Certification, Section 7

ADS-MS00x-107R • Preliminary Data Sheet

Page | 14

September 14, 2015

7 Regulatory Certification

The AMS00x family of modules has been certified for

operation in various regulatory domains. This section

outlines certification information specific to the follow-

ing countries and regions:

 United States

 Canada

 Europe

 Australia

 New Zealand

Should you require regulatory certification for the

AMS00x module in a country or region not listed, please

contact your local ACKme Networks sales office or cre-

ate

support

request

via

our

website

http://ack.me/contact.

7.1 United States

The ACKme Networks AMS-00x module has received

Federal Communications Commission (FCC) CFR47 Tele-

communications, Part 15 Sub-part C “Intentional Radia-

tors” modular approval in accordance with Part 15.212

Modular Transmitter approval. Modular approval al-

lows the end user to integrate the AMS-00x module

into a finished product without obtaining subsequent

and separate FCC approvals for intentional radiation,

provided no changes or modifications are made to the

module circuitry. Changes or modifications could void

the user’s authority to operate the equipment. The end

user must comply with all of the instructions provided

by the Grantee which indicate installation and/or oper-

ating conditions necessary for compliance.

The finished product is required to comply with all ap-

plicable FCC equipment authorization, regulations, re-

quirements, and equipment functions not associated

with the transmitter module portion. For example,

compliance must be demonstrated to regulations for

other transmitter components within the host product;

to requirements for unintentional radiators (Part 15

Sub-part B “Unintentional Radiators”), such as digital

devices, computer peripherals, radio receivers, etc.; and

to additional authorization requirements for non-

transmitter functions on the transmitter module (i.e.

Verification, or Declaration of Conformity) (e.g., trans-

mitter modules may also contain digital logic functions)

as appropriate.

Labeling and User Information

Requirements

The AMS-00x module has been labelled with a unique

FCC ID number, and if the FCC ID is not visible when the

module is installed inside another device, then the out-

side of the finished product into which the module is

installed must also display a label referring to the en-

closed module. This exterior label can use wording as

follows:

The user manual for the product should include the fol-

lowing statement:

Contains FCC ID: 2ABPY-BB4EA - Model No: AMS001

Contains FCC ID: 2ABPY-0D06E - Model No: AMS002

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause un-

desired operation.

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursu-

ant to part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate ra-

dio frequency energy and if not installed and used in

accordance with the instructions, may cause harm-

ful interference to radio communications. However,

there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment

does cause harmful interference to radio or televi-

sion reception, which can be determined by turning

the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equip-

ment and receiver.

 Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV

technician for help.

AMS001-R 数据表(PDF) 18 Page - Silicon Laboratories

AMS001-R 数据表(HTML) 18 Page - Silicon Laboratories

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

数据表下载