| 数据搜索系统,热门电子元器件搜索 |
|
L6985F 数据表(PDF) 45 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6985F 数据表(HTML) 45 Page - STMicroelectronics |
|
45 / 65 page ![]() DocID027836 Rev 2 45/65 L6985F Application notes 65 The CDELAY is dimensioned accordingly with Equation 41: Equation 41 The maximum suggested capacitor value is 270 nF. 6.5 Synchronization (LNM) Beating frequency noise is an issue when multiple switching regulators populate the same application board. The L6985F synchronization circuitry features the same switching frequency for a set of regulators simply connecting their SYNCH pin together, so preventing beating noise. The master device provides the synchronization signal to the others since the SYNCH pin is I/O able to deliver or recognize a frequency signal. For proper synchronization of multiple regulators, all of them have to be configured with the same switching frequency (see Table 6 on page 11), so the same resistor connected at the FSW pin. In order to minimize the RMS current flowing through the input filter, the L6985F device provides a phase shift of 180° between the master and the SLAVES. If more than two devices are synchronized, all slaves will have a common 180° phase shift with respect to the master. Considering two synchronized L6985F devices which regulates the same output voltage (i.e.: operating with the same duty cycle), the input filter RMS current is optimized and is calculated as: Equation 42 The graphical representation of the input RMS current of the input filter in the case of two devices with a 0° phase shift (synchronized to an external signal) or a 180° phase shift (synchronized connecting their SYNCH pins) regulating the same output voltage is provided in Figure 34. To dimension the proper input capacitor please refer to Section 6.6.1: Input capacitor selection on page 50. CDELAY ISSCH TDELAY VDELAY ------------------------------------------ 2 AT DELAY 1.234V ------------------------------------- == IRMS IOUT 2 ------------ 2D 1 2D – if D < 0.5 IOUT 2 ------------ 2D 1 – 22D – if D > 0.5 = |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |