PM6675 datasheet(24/47 Pages) STMICROELECTRONICS

24 / 47 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

Device description

PM6675

24/47

6.1.4

Mode-of-operation selection

Figure 11. VSEL and NOSKIP multifunction pin configurations

The PM6675 has been designed to satisfy the widest range of applications. The device is

provided with some multilevel pins which allow the user to choose the appropriate

configuration. The VSEL pin is used to firstly decide between fixed preset or adjustable

(user defined) output voltages.

When the VSEL pin is connected to +5V, the PM6675 sets the switching section output

voltage to 1.5V without the need of an external divider.

Applications requiring different output voltages can be managed by PM6675 simply setting

the adjustable mode. Consider that if the VSEL pin voltage is higher than 4V, the fixed

output mode is selected. When connecting an external divider to the VSEL pin, it is used as

negative input of the error amplifier and the output voltage is given by expression (20).

Equation 20

The output voltage can be set in the range from 0.6V to 3.3V.

The NOSKIP is the power saving algorithm selector: if tied to +5V, the forced-PWM (fixed

frequency) control is performed. If grounded or connected to VREF pin (1.237V reference

voltage), the Pulse-Skip or Non-Audible Pulse-Skip Modes are respectively selected.

PM6675

NOSKIP

VSEL

VOUT

+5V

VREF

VOUT

ADJ

⋅

PM6675 数据表(PDF) 24 Page - STMicroelectronics

PM6675 数据表(HTML) 24 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

数据表下载

链接网址

PM6675 数据表(PDF) 24 Page - STMicroelectronics

PM6675 数据表(HTML) 24 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

数据表 下载

链接网址

数据表下载