Application information

TSV62x, TSV62xA

14/24

DocID15689 Rev 6

4.4

Optimization of DC and AC parameters

These operational amplifiers use an innovative approach to reduce the spread of the main

DC and AC parameters. An internal adjustment achieves a very narrow spread of current

consumption (29 µA typical, min/max at ±17%). Parameters linked to the current

consumption value, such as GBP, SR and AVd benefit from this narrow dispersion. All parts

present a similar speed and the same behavior in terms of stability. In addition, the minimum

values of GBP and SR are guaranteed (GBP = 350 kHz min, SR = 0.12 V/µs min).

4.5

Shutdown function (TSV623, TSV625)

The operational amplifier is enabled when the SHDN pin is pulled high. To disable the

output is in a high impedance state. The SHDN pin must never be left floating but tied to

±

200 mV (Figure 18 and Figure 19 show the test configurations). Figure 20 and Figure 21

show output voltage behavior when the SHDN pin is toggled.

Figure 18. Test configuration for turn-on time

(Vout pulled down)

Figure 19. Test configuration for turn-off time

(Vout pulled down)

Vout pulled down, T = 25 °C

Vout pulled down, T = 25 °C

Shutdown puls e

Vout

Time( s )

µ

L

T = 25 °C

Vcc = ±2.5 V

R connected to G N D

Shutdown puls e

Vout

Time( s )

µ

Vcc = ±2.5 V

T = 25 °C