R5F104FAD datasheet(69/213 Pages) RENESAS

69 / 213 page

RL78/G14

2. ELECTRICAL SPECIFICATIONS (TA = -40 to +85

°C)

R01DS0053EJ0330 Rev. 3.30

Page 69 of 208

Aug 12, 2016

Note 1.

Total current flowing into VDD, EVDD0, and EVDD1, including the input leakage current flowing when the level of the input

pin is fixed to VDD, EVDD0, and EVDD1, or VSS, EVSS0, and EVSS1. The values below the MAX. column include the

peripheral operation current. However, not including the current flowing into the A/D converter, D/A converter,

comparator, LVD circuit, I/O port, and on-chip pull-up/pull-down resistors and the current flowing during data flash rewrite.

Note 2.

During HALT instruction execution by flash memory.

Note 3.

When high-speed on-chip oscillator and subsystem clock are stopped.

Note 4.

When high-speed system clock and subsystem clock are stopped.

Note 5.

When high-speed on-chip oscillator and high-speed system clock are stopped. When RTCLPC = 1 and setting ultra-low

current consumption (AMPHS1 = 1). The current flowing into the RTC is included. However, not including the current

flowing into the 12-bit interval timer and watchdog timer.

Note 6.

Not including the current flowing into the RTC, 12-bit interval timer, and watchdog timer.

Note 7.

Relationship between operation voltage width, operation frequency of CPU and operation mode is as below.

HS (high-speed main) mode:

2.7 V

≤ VDD ≤ 5.5 V@1 MHz to 32 MHz

2.4 V

≤ VDD ≤ 5.5 V@1 MHz to 16 MHz

LS (low-speed main) mode:

1.8 V

≤ VDD ≤ 5.5 V@1 MHz to 8 MHz

LV (low-voltage main) mode:

1.6 V

≤ VDD ≤ 5.5 V@1 MHz to 4 MHz

Note 8.

Regarding the value for current to operate the subsystem clock in STOP mode, refer to that in HALT mode.

Remark 1.

fMX:

High-speed system clock frequency (X1 clock oscillation frequency or external main system clock frequency)

Remark 2.

fHOCO: High-speed on-chip oscillator clock frequency (64 MHz max.)

Remark 3.

fIH:

High-speed on-chip oscillator clock frequency (32 MHz max.)

Remark 4.

fSUB:

Subsystem clock frequency (XT1 clock oscillation frequency)

Remark 5.

Except subsystem clock operation and STOP mode, temperature condition of the TYP. value is TA = 25°C

R5F104FAD 数据表(PDF) 69 Page - Renesas Technology Corp

R5F104FAD 数据表(HTML) 69 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载