CP20.241-R1, CP20.241-R2,

CP20.241-R3

CP-Series

June 2017 / Rev. 0.1 DS-CP20.241-R2-EN

All parameters are typical values specified at 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

13/30

P R E L I M I N A R Y

The terminals are IP20 Finger safe constructed and suitable for field- and factory wiring.

CP20.241-R1

Input

Output

DC-OK-Signal

Type

Quick-connect spring-

clamp termination

Quick-connect spring-

clamp termination

Push-in termination

Solid wire

Stranded wire

American Wire Gauge

AWG 20-10

AWG 20-10

AWG 24-16

Max. wire diameter (including ferrules)

2.8mm

2.8mm

1.6mm

Wire stripping length

10mm / 0.4inch

10mm / 0.4inch

7mm / 0.28inch

Screwdriver

3 mm slotted to open

the spring

CP20.241-R2

Input

Output

DC-OK-Signal

Type

Plug connector with

screw termination

Plug connector with

screw termination

Plug connector with

screw termination

Solid wire

Stranded wire

American Wire Gauge

AWG 20-12

AWG 24-10

AWG 26-14

Max. wire diameter (including ferrules)

2.4mm

3.2mm

1.8mm

Recommended tightening torque

Max. 0.5Nm, 4.5lb-in

Max. 0.6Nm, 5.3lb-in

Max. 0.8Nm, 7lb-in

Wire stripping length

7mm / 0.28inch

12mm / 0.47inch

6mm / 0.24inch

Screwdriver

3.5mm slotted or cross-

head No 2

3.5mm slotted or cross-

head No 2

3.5mm slotted

CP20.241-R3

Input

Output

DC-OK-Signal

Type

Screw termination

Screw termination

Push-in termination

Solid wire

Stranded wire

American Wire Gauge

AWG 20-10

AWG 20-10

AWG 24-16

Max. wire diameter (including ferrules)

2.8mm

2.8mm

1.6mm

Recommended tightening torque

Max. 1Nm, 9lb-in

Max. 1Nm, 9lb-in

-

Wire stripping length

7mm / 0.28inch

7mm / 0.28inch

7mm / 0.28inch

Screwdriver

3.5mm slotted or cross-

head No 2

3.5mm slotted or cross-

head No 2

3mm slotted to open

the spring

Instructions for wiring:

a)

Use appropriate copper cables that are designed for minimum operating temperatures of:

60°C for ambient up to 45°C and

75°C for ambient up to 60°C and

90°C for ambient up to 70°C minimum.

b)

Follow national installation codes and installation regulations!

c)

Ensure that all strands of a stranded wire enter the terminal connection!

d)

Unused terminal compartments should be securely tightened.

e)

Ferrules are allowed.