REV. A

Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties that

may result from its use. No license is granted by implication or otherwise

under any patent or patent rights of Analog Devices.

a

AD7675

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

www.analog.com

Fax: 781/326-8703

© Analog Devices, Inc., 2002

16-Bit, 100 kSPS,

Differential ADC

FUNCTIONAL BLOCK DIAGRAM

CONTROL LOGIC AND

CALIBRATION CIRCUITRY

CLOCK

OB/

2C

16

DATA[15:0]

BUSY

CS

SER/

PAR

OGND

OVDD

DGND

DVDD

SERIAL

PORT

PARALLEL

INTERFACE

BYTESWAP

RD

AVDD AGND

REF REFGND

PD

RESET

CNVST

IN–

SWITCHED

CAP DAC

AD7675

IN+

PulSAR Selection

Type/kSPS

100–250

500–570

1000

Pseudo

AD7660

AD7650

Differential

AD7664

True Bipolar

AD7663

AD7665

AD7671

True Differential

AD7675

AD7676

AD7677

FEATURES

Throughput: 100 kSPS

INL:

1.5 LSB Max ( 0.0015% of Full Scale)

16 Bits Resolution with No Missing Codes

S/(N+D): 94 dB Typ @ 45 kHz

THD: –110 dB Typ @ 45 kHz

Differential Input Range:

2.5 V

Both AC and DC Specifications

No Pipeline Delay

Parallel (8 Bits/16 Bits) and Serial 5 V/3 V Interface

SPI™/QSPI™/MICROWIRE™/DSP Compatible

Single 5 V Supply Operation

15 mW Typical Power Dissipation, 15

W @ 100 SPS

Power-Down Mode: 7

W Max

Packages: 48-Lead Quad Flatpack (LQFP),

46-Lead Frame Chip Scale (LFCSP)

Pin-to-Pin Compatible with the AD7660

Replacement of AD676, AD677

APPLICATIONS

CT Scanners

Data Acquisition

Instrumentation

Spectrum Analysis

Medical Instruments

Battery-Powered Systems

Process Control

GENERAL DESCRIPTION

The AD7675 is a 16-bit, 100 kSPS, charge redistribution SAR,

fully differential analog-to-digital converter that operates from a

single 5 V power supply. The part contains a high speed 16-bit

sampling ADC, an internal conversion clock, error correction

circuits, and both serial and parallel system interface ports.

The AD7675 is hardware factory calibrated and is comprehensively

tested to ensure such ac parameters as signal-to-noise ratio (SNR)

and total harmonic distortion (THD), in addition to the more

traditional dc parameters of gain, offset, and linearity.

It is fabricated using Analog Devices’ high performance, 0.6

micron CMOS process and is available in a 48-lead LQFP or a

tiny 48-lead LFCSP with operation specified from –40

°C to +85°C.

PRODUCT HIGHLIGHTS

1. Excellent INL

The AD7675 has a maximum integral nonlinearity of 1.5 LSB

with no missing 16-bit code.

2. Superior AC Performances

The AD7675 has a minimum dynamic of 92 dB, 94 dB typical.

3. Fast Throughput

The AD7675 is a 100 kSPS, charge redistribution, 16-bit

SAR ADC with internal error correction circuitry.

4. Single-Supply Operation

The AD7675 operates from a single 5 V supply and typically

dissipates only 17 mW. Its power dissipation decreases

with the throughput to, for instance, only 15

µW at a 100 SPS

throughput. It consumes 7

µW maximum when in power-down.

5. Serial or Parallel Interface

Versatile parallel (8 bits or 16 bits) or 2-wire serial interface

arrangement compatible with either 3 V or 5 V logic.

SPI and QSPI are trademarks of Motorola Inc.

MICROWIRE is a trademark of National Semiconductor Inc.