GENERAL DESCRIPTION
The ADIN2299 is a complete, pretested solution that manages the
industrial protocol and network traffic for an applications processor.
The module contains everything needed to participate in a Ether-
CAT, PROFINET® real-time (RT) and isochronous real time (IRT),
EtherNet/IP network, including a communications controller, protocol
stack, flash, RAM, follower controller, and physical layer (PHY).
An applications processor connects via a universal asynchronous
receiver transmitter (UART), serial peripheral interface (SPI), or
Ethernet interface.
At the software layer, the applications processor connects to a
unified interface so the supported industrial protocols can be
used without changing the applications processor software. The
ADIN2299 platform was precertified so that the field device can
operate in any of the supported industrial Ethernet networks.

FEATURES
► Configurable industrial protocol support
► PROFINET RT (Class B)
► PROFINET IRT (Class C): coming soon
► EtherNet/IP with DLR
► EtherCAT
► All protocols precertified
► Configurable applications processor interface
► UART: 115,200 bps to 1,000,000 bps
► Ethernet at 10 Mbps or 100 Mbps
► SPI follower: 10 MHz maximum clock
► I2C, QSPI, and CAN: future option
► Industrial Ethernet interface-compliant to IEEE 802.3, 10Base or 100Base transmit half and full duplex
► Single 3.3 V power supply, 840 mW
► Cycle time down to 1 ms (cycle times vary based on protocol, link type, and application data)
► 194-ball chip-scale package BGA form factor
► RoHS 3 compliant
► –40°C to +85°C industrial temperature range

APPLICATIONS
► Factory and process automation
► Motion control
► Building automation
► Transportation