Data Sheet

ADIN2299

RapID Platform Generation 2 (RPG2) Network Interface

Rev. 0

DOCUMENT FEEDBACK

TECHNICAL SUPPORT

Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog

Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to

change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

FEATURES

►

Configurable industrial protocol support

►

PROFINET RT (Class B)

►

PROFINET IRT (Class C): coming soon

►

EtherNet/IP with DLR

►

EtherCAT

►

All protocols precertified

►

Configurable applications processor interface

►

UART: 115,200 bps to 1,000,000 bps

►

Ethernet at 10 Mbps or 100 Mbps

►

SPI follower: 10 MHz maximum clock

►

►

Industrial Ethernet interface-compliant to IEEE 802.3, 10Base or

100Base transmit half and full duplex

►

Single 3.3 V power supply, 840 mW

►

Cycle time down to 1 ms (cycle times vary based on protocol,

link type, and application data)

►

194-ball chip-scale package BGA form factor

►

RoHS 3 compliant

►

–40°C to +85°C industrial temperature range

APPLICATIONS

►

Factory and process automation

►

Motion control

►

Building automation

►

Transportation

GENERAL DESCRIPTION

The ADIN2299 is a complete, pretested solution that manages the

industrial protocol and network traffic for an applications processor.

The module contains everything needed to participate in a Ether-

CAT, PROFINET

EtherNet/IP network, including a communications controller, proto-

col stack, flash, RAM, follower controller, and physical layer (PHY).

An applications processor connects via a universal asynchronous

receiver transmitter (UART), serial peripheral interface (SPI), or

Ethernet interface.

At the software layer, the applications processor connects to a

unified interface so the supported industrial protocols can be

used without changing the applications processor software. The

ADIN2299 platform was precertified so that the field device can

operate in any of the supported industrial Ethernet networks.

PRODUCT HIGHLIGHTS

1. Multiprotocol support

2. Small form factor for embedded applications

3. Low power and low latency

4. Robust network policing ensures passing PROFINET Netload

Class 3