The IMP1832 microprocessor supervisor can halt and restart a “hung-up” or “stalled” microprocessor, restart a microprocessor after a power failure, and debounce a manual push-button microprocessor reset switch. The IMP1832 features over 40% lower supply current than the pin compatible Dallas Semiconductor DS1832.

Key Features
◆ Pin compatible with the Dallas Semiconductor
   DS1832
   — Over 40% lower supply current
◆ 3.3V supply monitor
◆ Push-pull output
◆ Selectable watchdog period
◆ Debounce manual push-button reset input
◆ Precision temperature-compensated voltage
   reference and comparator
◆ Power-up, power-down and brownout detection
◆ 250ms minimum reset time
◆ Active LOW and HIGH reset signal
◆ Selectable trip point tolerance: 10% or 20%
◆ Low-cost 8-pin DIP/SO and 8-pin MicroSO
   packages
◆ Wide operating temperature –40°C to +85°C