AD8341

Rev. 0 | Page 4 of 20

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameters

Rating

Supply Voltage VPRF, VPS2

5.5 V

DSOP

5.5 V

IBBP, IBBM, QBBP, QBBM

2.5 V

RFOP, RFOM

5.5V

RF Input Power at Maximum Gain

13 dBm, re: 50 Ω

(RFIP or RFIM, Single-Ended Drive)

Equivalent Voltage

2.8 V p-p

Internal Power Dissipation

825 mW

59 °C/W

Maximum Junction Temperature

125°C

Operating Temperature Range

−40°C to +85°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature Range (Soldering 60 sec)

300°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the

human body and test equipment and can discharge without detection. Although this product features proprie-

tary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic

discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of

functionality.