Microchip Proprietary Information

©2012 Silicon Storage Technology, Inc.

DS75032A

10/12

Data Sheet

www.microchip.com

Features

• High Gain:

– Typically 29 dB gain across 2.4-2.5 GHz

– Typically 29-26 dB gain across 4.9-5.8 GHz10/12

• High linear output power:

– >25 dBm P1dB (Pulsed single-tone signal) across 2.4-2.5

GHz

– Meets 802.11b OFDM ACPR requirement up to 23.5

dBm across 2.4-2.5 GHz

– Meets 802.11g OFDM ACPR requirement up to 23 dBm

across 2.4-2.5 GHz

– Added EVM ~4% up to 19 dBm for

54 Mbps 802.11g signal across 2.4-2.5 GHz

– >24 dBm P1dB across 4.9-5.8 GHz

– Meets 802.11a OFDM ACPR requirement up to 22.5

dBm across 4.9-5.8 GHz

– Added EVM ~4% up to 18 dBm for

54 Mbps 802.11a signal across 4.9-5.8 GHz

• High power-added efficiency/Low operating cur-

rent for 802.11a/b/g applications

• High-speed power-up/down

– Turn on/off time (10%-90%) <100 ns

– Typical power-up/down delay with driver delay included

<200 ns

• High temperature stability

– ~1 dB gain/power variation between 0°C to +85°C across

2.4-2.5 GHz

– ~3/1 dB gain/max linear power variation between 0°C to

+85°C across 4.9-5.8 GHz

– ±0.5 dB detector variation between 0°C to +85°C

• Low shut-down current (< 2 µA)

• 20 dB dynamic range on-chip power detection

• Built-in input/output matching

• Packages available

– 16-contact LGA package (4mm x 4mm)

• All non-Pb (lead-free) devices are ROHS compliant.

Applications

• WLAN (IEEE 802.11a/g/b)

• Japanese WLAN

• HyperLAN2

• Multimedia

• Home RF

• Cordless phones

2.4-2.5 GHz / 4.9-5.8 GHz Dual-Band Power Amplifier Module

SST13LP05

The SST13LP05 is a fully matched, dual-band power amplifier module (PAM) based

on the highly-reliable InGaP/GaAs HBT technology. This PAM provides excellent

RF performance, temperature-stable power detectors, and low-current analog on/

off control interfaces. The SST13LP05 provides stable RF and power detector per-

formance over a large VCC power supply variation, with an ultra-low shut-down cur-

rent. The SST13LP05 is ideal for the final stage power amplification in both battery-

powered 802.11a/b/g WLAN transmitters and access point applications.