Philips Semiconductors

Product data

PCA9558

2002 May 24

13

In accordance with the Absolute Maximum Rating System (IEC 134)

Voltages are referenced to GND (ground = 0 V)

SYMBOL

PARAMETER

CONDITIONS

RATING

UNIT

DC supply voltage

2.5 to 4.6

V

DC input voltage

Note 3

V

DC output voltage

Note 3

V

Storage temperature range

–60 to +150

°C

NOTES:

1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the

device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to

absolute-maximum-rated conditions for extended periods may affect device reliability.

2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction

temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150

°C.

3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

RECOMMENDED OPERATING CONDITIONS

SYMBOL

PARAMETER

CONDITIONS

LIMITS

UNIT

SYMBOL

PARAMETER

CONDITIONS

MIN

MAX

UNIT

DC supply voltage

3

3.6

V

–0.5

0.9

V

SCL SDA

2.7

4.0

V

SCL, SDA

—

0.4

V

—

0.6

V

MUX_OUT_LOW, MUX_IN,

–0.5

0.8

V

__

,

_

,

MUX_SELECT

2.0

4.0

V

MUX OUT NON MUXED OUT

—

4

mA

MUX_OUT, NON_MUXED_OUT

—

100

µA

dt/dv

Input transition rise or fall time

0

10

ns/V

Operating temperature

0

+70

°C