High Speed, Triple Differential

Receiver with Comparators

Data Sheet

AD8143

Rev. A

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

©2005–2016 Analog Devices, Inc. All rights reserved.

Technical Support

www.analog.com

FEATURES

High speed

160 MHz large signal bandwidth

High CMRR: 65 dB at 10 MHz

High differential input impedance: 5 MΩ

Input common-mode range: ±10.5 V (±12 V supplies)

User-adjustable gain

Wide power supply range: +5 V to ±12 V

Fast settling: 8 ns to 1%

Disable feature

Low offset: ±3.4 mV on 5 V supply

2 on-chip comparators

Small packaging: 32-lead, 5 mm × 5 mm LFCSP

APPLICATIONS

RGB video receivers

Keyboard-video-mouse (KVM)

Unshielded twisted pair (UTP) receivers

PIN CONFIGURATION

REF_G

GND

IN+_G

FB_G

REF_R

IN–_G

GND

FB_R

OUT_B

GND

OUT_R

OUT_G

COMPB_IN+

GND

COMPB_IN–

AD8143

A

B

32

31

30

29

28

27

26

25

9

10

11

12

13

14

15

16

24

23

22

21

20

19

18

17

1

2

3

4

5

6

7

8

Figure 1.

GENERAL DESCRIPTION

The AD8143 is a triple, low cost, differential-to-single-

ended receiver specifically designed for receiving red-

green-blue (RGB) signals over twisted pair cable. It can

also be used for receiving any type of analog signal or

high speed data transmission. Two auxiliary comparators

are provided to receive digital or sync signals. The

AD8143 can be used in conjunction with the AD8133

and AD8134 triple, differential drivers to provide a

complete low cost solution for RGB over Category-5

UTP cable applications, including KVM.

The excellent common-mode rejection (65 dB at

10 MHz) of the AD8143 allows for the use of low cost

unshielded twisted pair cables in noisy environments.

The AD8143 has a wide power supply range from single +5 V

supply to ±12 V, which allows for a wide common-mode range.

The wide common-mode input range of the AD8143 maintains

signal integrity in systems where the ground potential is a few

volts different between the drive and receive ends without the

use of isolation transformers.

The AD8143 is stable at a gain of 1. Closed-loop gain is easily

set using external resistors.

The AD8143 is available in a 5 mm × 5 mm, 32-lead LFCSP and

is rated to work over the extended industrial temperature range

of −40°C to +85°C.