DocID031281 Rev 3

29/35

VL53L1X

Packaging and labeling

35

8

Packaging and labeling

8.1

Product marking

A 2-line product marking is applied on the backside of the module (i.e. on the substrate).

The first line is the silicon product code, and the second line, the internal tracking code.

Figure 22. Example of prototype marking

8.2

Inner box labeling

The labeling follows the ST standard packing acceptance specification.

The following information will be on the inner box label:

•

Assembly site

•

Sales type

•

Quantity

•

Trace code

•

Marking

•

Bulk ID number

8.3

Packing

At customer/subcontractor level, it is recommended to mount the VL53L1X in a clean

environment to avoid foreign material deposition.

To help avoid any foreign material contamination at phone assembly level the modules are

shipped in a tape and reel format with a protective liner.

The packaging is vacuum-sealed and includes a desiccant.

The liner is compliant with reflow at 260 °C. It must be removed during assembly of the

customer device, just before mounting the cover glass.