PUSB3F96 datasheet(2/16 Pages) NEXPERIA

2 / 16 page

Product profile

1.1 General description

The device is designed to protect high-speed interfaces such as SuperSpeed USB,

High-Definition Multimedia Interface (HDMI), DisplayPort, external Serial Advanced

Technology Attachment (eSATA) and Low Voltage Differential Signaling (LVDS) interfaces

against ElectroStatic Discharge (ESD).

The device includes four high-level ESD protection diode structures for ultra high-speed

signal lines and is encapsulated in a leadless small DFN2510A-10 (SOT1176-1) plastic

package.

All signal lines are protected by a special diode configuration offering ultra low line

capacitance of only 0.5 pF. These diodes utilize a unique snap-back structure in order to

provide protection to downstream components from ESD voltages up to

10 kV contact

exceeding IEC 61000-4-2, level 4.

1.2 Features and benefits

 System ESD protection for USB 2.0 and SuperSpeed USB 3.0, HDMI 2.0, DisplayPort,

eSATA and LVDS

 All signal lines with integrated rail-to-rail clamping diodes for downstream

ESD protection of

10 kV exceeding IEC 61000-4-2, level 4

 Matched 0.5 mm trace spacing

 Signal lines with

 0.05 pF matching capacitance between signal pairs

 Line capacitance of only 0.5 pF for each channel

 Design-friendly ‘pass-through’ signal routing

1.3 Applications

The device is designed for high-speed receiver and transmitter port protection:

 TVs and monitors

 DVD recorders and players

 Notebooks, main board graphic cards and ports

 Set-top boxes and game consoles

PUSB3F96

ESD protection for ultra high-speed interfaces

Rev. 3 — 29 September 2014

Product data sheet

PUSB3F96 数据表(PDF) 2 Page - Nexperia B.V. All rights reserved

PUSB3F96 数据表(HTML) 2 Page - Nexperia B.V. All rights reserved

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

数据表下载