Tel: +86-755-66839118

Fax:+86-755-66839300

E-mail:uvsales@refond.com

W

eb: www.refonduv.com

REFOND:WI-E-045

A/3

REV:E/3

TG-201709070731NP

Notes

1. The above forward voltage measurement allowance tolerance is ±0.1V.

2. The above wavelenth measurement allowance tolerance is ±2nm.

±

3. The above radiation flux measurement allowance tolerance ±10%.

4. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.

5. All measurements were made under the standardized environment of Refond.

6.When the LEDs are in operation the maximum current should be decided after measuring the package

temperature, junction temperature should not exceed the maximum rate

7. ESD yield is over 90% at 2000V ESD (HBM). ESD protection during products handing is needed.