| 数据搜索系统,热门电子元器件搜索 |
|
STV8207 数据表(PDF) 21 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV8207 数据表(HTML) 21 Page - STMicroelectronics |
|
21 / 149 page ![]() 21/149 STV82x7 Digital Demodulator 3 Digital Demodulator The Digital Demodulator (see Figure 10) is composed of two channels. The first channel demodulates an FM or an AM signal. The second channel demodulates FM 2-carrier or NICAM signals (stereo demodulation). All channel parameters are programmed automatically by the built-in Automatic Standard Recognition System (Autostandard) in order to find the correct sound standard. Channels can also be programmed manually via the I²C interface for very specific standards not included among the known standards. 3.1 Sound IF Signal The Analog Sound Carrier IF is connected to the STV82x7 via the SIF pin. Before Analog-to-Digital Conversion (ADC), an Automatic Gain Control (AGC) is performed to adjust the incoming IF signal to the full scale of the ADC. A preliminary video rejection is recommended to optimize conversion and demodulation performances. The AGC system provides a gain value allowing for a wide range of SIF input levels and is activated for all standards, except L/L’. In this particular case, the sound carrier is AM-modulated and an automatic level adjustment would only damage the transmitted audio signal. A preset I²C parameter is provided to define the gain of the AGC used in Manual mode (Registers AGC_CTRL and AGC_GAIN). Note: For optimum AM demodulation performance, it is recommended to use the MONO Input. Figure 10: Demodulator Block Diagram Mixer Mixer DCO2 + Channel Filter FIR1 Channel Filter FIR2 AM Demodulator FM Demodulator FM Demodulator DQPSK Demodulator AUTOSTD AGC Control SIF NICAM Decoder DCO1+ Zweiton A/D NICAM L NICAM R AM/FM Mono AM FML FM Stereo AUTOSTD_CTRL (8Ah) AUTOSTD_STANDARD_DETECT (8Bh) AUTOSTD_STEREO_DETECT (8Ch) AUTOSTD_STATUS (8Eh) DEMOD_STAT(0Dh) ZWT_STAT (42h) NICAM_STAT(3Fh) CAROFFSET1 (22h) CAROFFSET2 (3Ah) Channel 1 = Mono Left Channel 2 = Stereo/Mono Right AGC_CTRL (0Eh) AGC_GAIN (0Fh) (To Sound Preprocessing) (To Sound Preprocessing) (To Sound Preprocessing) Decoder AGC Amp AUTOSTD_TIMERS (8Dh) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |