Hardware configuration

UM1075

8/19

UM1075 Rev 8

4

Hardware configuration

The ST-LINK/V2 is designed around the STM32F103C8 device, which incorporates the

As shown in Figure 4, the ST-LINK/V2 provides two connectors:

•

an STM32 connector for the JTAG/SWD and SWV interface

•

an STM8 connector for the SWIM interface

The ST-LINK/V2-ISOL provides one connector for the STM8 SWIM, STM32 JTAG/SWD and

SWV interfaces.

Figure 4. Connectors of the ST-LINK/V2 (on the left) and of the ST-LINK/V2-ISOL (on the right)

1. A = STM32 JTAG and SWD target connector

2. B = STM8 SWIM target connector

3. C = STM8 SWIM, STM32 JTAG and SWD target connector

4. D = Communication activity LED

a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

B

A

D

C

D