Hardware configuration

UM1075

10/19

UM1075 Rev 8

Figure 6. Key detail on connectors

4.1.2

Low-cost SWIM connection

Figure 7 shows how to connect the ST-LINK/V2 if a 4-pin, 2.54 mm, low-cost SWIM

connector is present on the application board.

Figure 7. Low-cost connection

1. A = Target application board with 4-pin, 2.54 mm, low-cost connector

2. B = Wire cable with a 4-pin connector or separate-wires cable

3. C = STM8 SWIM target connector

4. See Figure 12

4.1.3

SWIM signals and connections

Table 2 summarizes the signal names, functions, and target connection signals using the

wire cable with a 4-pin connector.

A

B

C

A

B

C