MCP47CMB02 datasheet(116/124 Pages) MICROCHIP

116 / 124 page

MCP47CXBXX

DS20006089B-page 116

 2018-2019 Microchip Technology Inc.

C.4

Full-Scale Error (EFS)

The Full-Scale Error, EFS (see Figure C-3), is the error

on the VOUT pin relative to the expected VOUT voltage

(theoretical) for the maximum device DAC register

code (code FFFh for 12-bit, code 3FFh for 10-bit and

code FFh for 8-bit); see Equation C-2. The error is

dependent on the resistive load on the VOUT pin (and

where that load is tied to, such as VSS or VDD). For

loads (to VSS) greater than specified, the full-scale

error will be greater.

The error in bits is determined by the theoretical voltage

step-size to give an error in LSb.

EQUATION C-2:

FULL-SCALE ERROR

C.5

Zero-Scale Error (EZS)

The Zero-Scale Error, EZS (see Figure C-2), is the differ-

ence between the ideal and measured VOUT voltage with

the DAC register code equal to 000h (Equation C-3). The

error is dependent on the resistive load on the VOUT pin

(and where that load is tied to, such as VSS or VDD). For

loads (to VDD) greater than specified, the zero-scale

error is greater.

The error in bits is determined by the theoretical voltage

step-size to give an error in LSb.

EQUATION C-3:

ZERO-SCALE ERROR

C.6

Total Unadjusted Error (ET)

The Total Unadjusted Error (ET) is the difference

between the ideal and measured VOUT voltage. Typi-

cally, calibration of the output voltage is implemented

to improve the system’s performance.

The error in bits is determined by the theortical voltage

step-size to give an error in LSb.

Equation C-4 shows the total unadjusted error

calculation.

EQUATION C-4:

TOTAL UNADJUSTED

ERROR CALCULATION

Where:

EFS is expressed in LSb.

VOUT(@FS) is the VOUT voltage when the DAC

VIDEAL(@FS) is the ideal output voltage when the

DAC register code is at full scale.

VLSb(IDEAL) is the theoretical voltage step-size.

EFS

VOUT(@FS) VIDEAL(@FS)

–

VLSb IDEAL



----------------------------------------------------------------

Where:

EFS is expressed in LSb.

VOUT(@ZS) is the VOUT voltage when the DAC

VLSb(IDEAL) is the theoretical voltage step-size.

EZS

VOUT(@ZS)

VLSb(IDEAL)

----------------------------

Where:

ET is expressed in LSb.

VOUT_Actual(@code) = The measured DAC output

voltage at the specified

code

VOUT_Ideal(@code) = The calculated DAC output

voltage at the specified

code (code * VLSb(Ideal))

VLSb(Ideal) =VREF/# Steps

12-bit = VREF/4096

10-bit = VREF/1024

8-bit = VREF/256

VOUT_Actual(@code) VOUT_Ideal(@code)

–



VLSb Ideal



--------------------------------------------------------------------------------------------------

MCP47CMB02 数据表(PDF) 116 Page - Microchip Technology

MCP47CMB02 数据表(HTML) 116 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

MCP47CMB02 数据表(PDF) 116 Page - Microchip Technology

MCP47CMB02 数据表(HTML) 116 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载