Silicom Ltd. Connectivity Solutions

Page

3

o

Failover



Priority queuing

– 802.1p layer 2 priority encoding.



Virtual LANs

–802.1q VLAN tagging.



Jumbo Frame (9.5KB).



802.x flow control.



Multicast/ broadcast Packet replication



Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)



Supports Vital Product Data (VPD)



Supports End to End CRC (ECRC)



Supports Latency Tolerance Reporting (LTR)



Minimized device I/O interrupts using MSI and MSI-X



Supports IEEE 1588



LEDs indicators for link/Activity/Bypass/ Disconnect Mode status.



Hot Plug not supported. Can be supported by assembly change

Fiber Gigabit Ethernet 1000Base-SX:



Independently Fiber Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-SX.



Small Form Factor (SFF) LC Connectors.

Fiber Gigabit Ethernet 1000Base-LX:



Independently Fiber Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-LX.



Small Form Factor (SFF) LC Connectors

Technical Specifications

Bypass Specifications

WDT Interval (Software

Programmable):

3,276,800 mSec (3,276.8 Sec): Maximum

100 mSec ( 0.1 Sec) : Minimum

WDT Interval = (2^wdt_interval_parameter)*(0.1) sec.

wdt_interval_parameter: { Valid Range: 0-15}

Fiber Gigabit Ethernet Technical Specifications

– (1000Base-SX) Adapters:

IEEE Standard / Network

topology:

Fiber 10Gigabit Ethernet, 10GBASE-SR (850nM LAN PHY)

Data Transfer Rate:

2000Mbit/s in full duplex mode per port

usa.com

-

licom

ww.si

w