Silicom Ltd. Connectivity Solutions

Page

6

CE IEC 6100-4-3:1995

Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz

CE IEC 6100-4-4:1995

EFT/B: Immunity to electrical fast transients 1kV Power

Leads, 0.5Kv Signals Leads

CE IEC 6100-4-5:1995

Immunity to conductive surges COM Mode; 2kV

Dif. Mode 1kV

CE IEC 6100-4-6:1996

Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.

By 1kHz

CE IEC 6100-4-11:1994

Voltage Dips and Short Interruptions

V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

MTBF:

79 (Years)

*According to Telcordia SR-332 Issue 2

Environmental condition

– GB (Ground, Fixed, Controlled). Ambient temperature – 40°C.

Temperature rise of 15°C above the system ambient temperature was assumed for the cards

components

LEDs

LEDs:

(1) LEDs per port

Link/Act :

Turns on link (Green),

Blinks on activity (Green)

Between each 2 ports : Link Speed / Bypass / Disconnect :

Turns off on normal link.

Yellow on Disconnect

Green on Bypass

LEDs location:

LEDs are located on the PCB, visible via holes in the metal bracket. Each 2 green act/ link and

speed link/bypass/disconnect LEDs are located above their own LC connector port- visible by

light pipes

Connectors:

(4) LC

Functional Description

Silicom’s Quad Port Fiber Bypass adapter supports Normal, Bypass and Disconnect modes. In Normal mode, the ports are

independent interfaces

(see Figure 1: Normal mode, one Bypass pair is illustrated)

usa.com

-

licom

ww.si

w