MODEL: M2MNV

M2MNV SPECIFICATIONS

ES-5095 Rev.9 Page 1/6

http://www.m-system.co.jp/

Super-mini Signal Conditioners Mini-M Series

ANALOG SWITCHING MODULE

Functions & Features

• Switches between two analog signal channels

• Switches/Distributes one voltage signal to two channels

Typical Applications

• Switching 1 – 5V DC signal: no contact failure that

happens when using mechanical contacts for this purpose

• Switching low-speed pulse signals

Model

29.5 (1.16)

76

(2.99)

mm (inch)

124

(4.88)

MODEL: M2MNV-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M2MNV-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. M2MNV-11-M2/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Note: Must be used with its socket. NOT installable to a

multi-unit installation base. (e.g. model: M2BS-16)

[1] SWITCHING CONTROL

1: Interlocking switching control (single-pole contact)

2: Independent switching control (double-pole contact)

[2] INPUT

1: Current signal (no receiving resistor)

2: Current signal (receiving resistor 50 Ω)

3: Voltage signal

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Switching: Photo MOSFET relay

Isolation: Signal channel to switching command contact to

power

Power indicator LED: Green light turns on when the power is

supplied.

Status indicator LED 1: Green light turns on when the signal

channel 1 (A1-B1) is alive.

Status indicator LED 2: Green light turns on when the signal

channel 2 (A2-B1) is alive.

INPUT & OUTPUT

■ Signal Channels

Max. operational voltage range: ±50 V DC (min. span 10

mV)

Max. operational current range: ±50 mA DC (min. span 1

mA)

Max. operational frequency range: 100 Hz

Receiving resistor: 50 Ω incorporated (input code 2)