MODEL: 73VR1100

73VR1100 SPECIFICATIONS

ES-7399 Rev.24 Page 3/18

https://www.m-system.co.jp/

INSTALLATION

Power input

•AC:

Approx. 15 VA at 100 V

Approx. 20 VA at 240 V

•DC: 8 W or 340 mA

Operating temperature: 0 to 50°C (32 to 122°F)

Display quality (e.g. decreased contrast) may deteriorate

when the recorder is used for a long time in an environment

exceeding 50°C. However, it is only a temporary

phenomenon. When the recorder is back in normal

temperature, full legibility is recovered. No damage in

performance.

Operating humidity: 30 to 85 %RH (non-condensing)

Corrosive gas: Not allowed

Mounting: Panel flush mounting (except desktop type)

Panel cutout dimensions: 137 × 137 mm (5.39”× 5.39”)

Weight: 1.7 kg (3.7 lb)

Caution: Use of UPS (switching time: without delay, output:

sine waveforms) is recommended to prevent data loss or CF

card damage by a loss of power during recording.

PERFORMANCE

Calendar clock accuracy: Monthly deviation 3 minutes at

25°C

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(alarm output to RUN output to power or FG or RS-485)

AC powered:

2000 V AC @ 1 minute (power to FG or Ethernet or RS-485)

500 V AC @ 1 minute (FG or RS-485 to Ethernet)

DC powered:

1250 V AC @ 1 minute (power to FG or Ethernet or RS-485)

500 V AC @ 1 minute (FG or RS-485 to Ethernet)

STANDARDS & APPROVALS

EU conformity:

(M2 AC power of desktop type does not conform to EU

directive)

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Alarm output to RUN output to power to FG or Ethernet or

RS-485: Reinforced insulation (300 V)

RoHS Directive