MODEL: 73VR1100

73VR1100 SPECIFICATIONS

ES-7399 Rev.24 Page 11/18

https://www.m-system.co.jp/

minutes (Actual storing rate depends upon the number of

I/O devices. Contact M-System for more information.)

[Example] Max. number of I/O devices that ensures 500

msec. storing intervals under the following conditions:

Data cycle priority on alarm, RS-485 connection, no trigger

or alarm setting

R1M-GH2: 10

RZMS-U9: 2

R3-NE1: 1 (128 channels, analog input only)

■ DATA STORAGE

Data file: Stores momentary values in the storing rate and

their calculation result.

Alarm history file: Records time index information when

alarms are triggered and reset.

Oldest data is overwritten with new data when the number

of records reaches its limit.

Comment history file: Records comments written in trend

views with time index. Oldest data is overwritten with new

data when the number of records reaches 1000 files.

Configuration file: Stores the 73VR1100 setting.

File format: Binary

Oldest measured data is overwritten with new data or data

recording is stopped when the card memory is full.

■ ALARM

• Analog Alarm

Alarm setpoints: Max. 4 points per channel

Alarm type: High / Low

Deadband: Set in engineering unit values

Output: Remote output devices

• Discrete Alarm

Alarm type: ON / OFF

Delay time: Selectable

Output: Remote output devices

• Data Storage: Trigger time, reset time, pen number and

tag name, alarm message

Number of stored alarm events: Depends upon the CF Card

capacity.

128 MB: 250 events

256 MB: 500 events

512 MB or 1 GB: 1000 events

■ CALCULATION FUNCTIONS

Function pen points

High speed mode: 32 points

Normal mode: 32 or 64 points selectable

Operations

Arithmetic: Addition/subtraction, Multiplication, Division

Logical: AND, OR, NOT, XOR

Mathematical: Square root extractor, Power

Accumulation: Analog accumulation, Pulse accumulation

(per time unit)

Filter: Moving average, First order lag

Hold: Peak (maximum) hold (tracking increasing signal),

Peak (minimum) hold (tracking decreasing signal)

F value: F value

Anemoscope (16 directions)

Alarm: Alarm trip can be programmed for calculated results.

■ DATA DISPLAY FUNCTIONS

• Trend View

Chart direction: Perpendicular or horizontal

Number of pens displayed: 2, 4, 6, 8 per view

Number of display views: 4

Chart speed:(Chart speed is described as number of pixels

to plot single data sample.)(pixel(s)/samples)

•4, 1, 1/5, 1/32

•1/160, 1/480 or 1/960 (Not selectable with 100 msec.

storing rate)

Display rate:(Common setting to all views)

1, 2 or 5 sec.

Pen thickness: Normal and wide

Digital indicator: Shows momentary value.

Alarm indicator: Shows alarm status of the channels

displayed on the screen.

Comment: Shows comments entered manually.

Scale: Linear and square root; Switchable to the engineering

unit scale.

• Bargraph View

Bargraph direction: Perpendicular or horizontal

Number of pens displayed: 2, 4, 6, 8 per view

Number of display views: 4

Display rate:(Common setting to all views)

1, 2 or 5 sec.

Digital indicator: Shows momentary value.

Alarm indicator: Shows alarm status of the channels

displayed on the screen.

Scale: Linear and square root;

Switchable to the engineering unit scale.

• Overview

Number of pens displayed: 2, 4, 6, 8, 16 per view

Number of display views: 64

Display rate:(Common setting to all views)

1, 2, or 5 sec.

Alarm indicator: Shows alarm status and date/time of the

last alarm trip and reset for the channels displayed on the

screen.

• Graphic View

Number of display views: 2

Display rate:(Common setting to all views)

1, 2 or 5 sec.

Background image file format: .bmp

Background image size: 320 by 240 pixels

Background image color: 256

Number of components displayed: Max. 64 per view

• Retrieve View: Shows data stored in the CF Card.

Number of pens displayed: 2, 4, 6, 8 per view