MODEL: R7G4HML3-6-LC2

R7G4HML3-6-LC2 SPECIFICATIONS

ES-7772-AX Rev.0 Page 3/8

http://www.m-system.co.jp/

±0.15 % (Averaging 4 samples)

±0.20 % (Averaging 2 samples)

Option code /R05

±0.05 % (Averaging 512 samples or more)

±0.10 % (Averaging 64, 128, 256 samples)

±0.20 % (Averaging 16, 32 samples)

±0.30 % (Averaging 2, 4, 8 samples)

Monitor output accuracy: ±0.1 %

Converted data range:

Input 0 / input 1: 0 – 10000 of the range from zero to span

Total input data: Sum of input 0 and input 1

Temperature coefficient:

Strain gauge input: ±0.015 %/°C (±0.008 %/°F)

Monitor output: ±0.015 %/°C (±0.008 %/°F)

Input delay time:

Lowpass filter 2 kHz max. 20 msec. (0 - 90 %)

Lowpass filter 2 Hz max. 200 msec. (0 - 90 %)

Lowpass filter 1 Hz max. 400 msec. (0 - 90 %)

Output delay time: ≤ 250 msec. (0 – 90 %)

Resolution: 1/10000

Insulation resistance: ≥ 100 MΩ with 500 V DC

Isolation: 1500 V AC @ 1 minute

(input 0 or monitor output 0 to input 1 or monitor output 1

to MECHATROLINK or FE to power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

PC CONFIGURATOR

The following parameters can be set with using PC

Configurator Software (model: R7CFG)

Refer to the users manual for the R7CFG for detailed

operation of the software program.

■ SETTINGS FOR INDIVIDUAL CHANNELS

PARAMETER

SETTING RANGE

DEFAULT SETTING

Zero adjustment

-50 to +50%

–

Span adjustment

10% to full scale

Full scale

Auto zero

–

–

Reset offset

–

–

Auto scale

0 to 32 000

–

Bias

-320.00 to +320.00 (%)

0.00 (%)

Gain

-3.2000 to +3.2000

1.0000

Zero scale

-32 000 to +32 000

0

Full scale

-32 000 to +32 000

10 000

Load ratio

10.00 to 100.00 (%)

100.00 (%)

Averaging

2, 4, 8, 16, 32, 64, 128,

256, 512, 1024

16

Excitation

5V, 2.5V

5V

Lowpass lter

2Hz, 2kHz (1Hz only for

/F1)

2kHz (1Hz only

for /F1)

Monitor output

-115.00 to +115.00 (%)

–