 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ADP5034ACPZ-R7 数据表(PDF) 5 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP5034ACPZ-R7 数据表(HTML) 5 Page - Analog Devices |
|
|
5 / 28 page  Data Sheet ADP5034 Rev. E | Page 5 of 28 BUCK1 AND BUCK2 SPECIFICATIONS VAVIN = VIN1 = VIN2 = 2.3 V to 5.5 V; TJ = −40°C to +125°C for minimum/maximum specifications, and TA = 25°C for typical specifications, unless otherwise noted.1 Table 3. Parameter Symbol Test Conditions/Comments Min Typ Max Unit OUTPUT CHARACTERISTICS Output Voltage Accuracy ΔVOUT1/VOUT1, ΔVOUT2/VOUT2 PWM mode; ILOAD1 = ILOAD2 = 0 mA −1.8 +1.8 % Line Regulation (ΔVOUT1/VOUT1)/ΔVIN1, (ΔVOUT2/VOUT2)/ΔVIN2 PWM mode −0.05 %/V Load Regulation (ΔVOUT1/VOUT1)/ΔIOUT1, (ΔVOUT2/VOUT2)/ΔIOUT2 ILOAD = 0 mA to 1200 mA, PWM mode −0.1 %/A VOLTAGE FEEDBACK VFB1, VFB2 Models with adjustable outputs 0.491 0.5 0.509 V OPERATING SUPPLY CURRENT MODE = ground BUCK1 Only IIN ILOAD1 = 0 mA, device not switching, all other channels disabled 44 μA BUCK2 Only IIN ILOAD2 = 0 mA, device not switching, all other channels disabled 55 μA BUCK1 and BUCK2 IIN ILOAD1 = ILOAD2 = 0 mA, device not switching, LDO channels disabled 67 μA PSM CURRENT THRESHOLD IPSM PSM to PWM operation 100 mA SW CHARACTERISTICS SW On Resistance RNFET VIN1 = VIN2 = 3.6 V; LFCSP package 155 240 mΩ RPFET VIN1 = VIN2 = 3.6 V; LFCSP package 205 310 mΩ RNFET VIN1 = VIN2 = 5.5 V; LFCSP package 137 204 mΩ RPFET VIN1 = VIN2 = 5.5 V; LFCSP package 162 243 mΩ RNFET VIN1 = VIN2 = 3.6 V; TSSOP package 156 237 mΩ RPFET VIN1 = VIN2 = 3.6 V; TSSOP package 194 270 mΩ RNFET VIN1 = VIN2 = 5.5 V; TSSOP package 137 202 mΩ RPFET VIN1 = VIN2 = 5.5 V; TSSOP package 154 212 mΩ Current Limit ILIMIT1, ILIMIT2 pFET switch peak current limit 1600 1950 2300 mA ACTIVE PULL-DOWN RPDWN-B VIN1= VIN2 = 3.6 V; Channel disabled 75 Ω OSCILLATOR FREQUENCY fSW 2.5 3.0 3.5 MHz 1 All limits at temperature extremes are guaranteed via correlation using standard statistical quality control (SQC). LDO1 AND LDO2 SPECIFICATIONS VIN3 = (VOUT3 + 0.5 V) or 1.7 V (whichever is greater) to 5.5 V, VIN4 = (VOUT4 + 0.5 V) or 1.7 V (whichever is greater) to 5.5 V; CIN = COUT = 1 µF; TJ = −40°C to +125°C for minimum/maximum specifications, and TA = 25°C for typical specifications, unless otherwise noted.1 Table 4. Parameter Symbol Test Conditions/Comments Min Typ Max Unit INPUT VOLTAGE RANGE VIN3, VIN4 1.7 5.5 V OPERATING SUPPLY CURRENT Bias Current per LDO2 IVIN3BIAS/IVIN4BIAS IOUT3 = IOUT4 = 0 µA 10 30 µA IOUT3 = IOUT4 = 10 mA 60 100 µA IOUT3 = IOUT4 = 300 mA 165 245 µA Total System Input Current IIN Includes all current into AVIN, VIN1, VIN2, VIN3, and VIN4 LDO1 or LDO2 Only IOUT3 = IOUT4 = 0 µA, all other channels disabled 53 µA LDO1 and LDO2 Only IOUT3 = IOUT4 = 0 µA, buck channels disabled 74 µA |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
