Data Sheet

ADCA5190

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 22

Table 4. Absolute Maximum Ratings

Parameter

Rating

DC Supply over Voltage (5 Minutes)

10 V

500 mA

RF Input Power

60 dBmV

Temperature

−40°C to +100°C

Peak Reflow (Moisture Sensitivity Level (MSL) 3)

260°C

to Failure (MTTF)

150°C

122°C

−65°C to +150°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Careful attention to PCB

thermal design is required.

pseudomorphic, high electron mobility transistor (pHEMT) device to

the outside surface of the package closest to the device mounting

area (the exposed pad on the bottom of the case). See the Thermal

Considerations section for additional information.

Table 5. Thermal Resistance

Package Type

Unit

CP-32-13

7.5

°C/W

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

ESD Ratings for ADCA5190

Table 6. ADCA5190, 32-Lead LFCSP

ESD Model

Withstand Threshold (V)

Class

HBM

350

Class 1A, passed

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.