SWCS049A datasheet(6/144 Pages) TI

6 / 144 page

TPS65911

SWCS049S – JUNE 2010 – REVISED AUGUST 2018

www.ti.com

Submit Documentation Feedback

Product Folder Links: TPS65911

Revision History

Detailed Revision History (continued)

Version

Literature Number

Date

Notes

(5)

TPS65911 Data Manual, SWCS049D - Version D:

•

Update Section 5.1:

•

Add VBACKUP

•

Voltage range on balls HDRST - Replace "VRTCMAX + 0.32 by "7"

•

Update Section 5.3:

•

Add VCC4 and VBACKUP

•

Input voltage range on pins or balls - Remove VCC4

•

Update Section 5.5: Change "HDRST programmable.." to "HDREST, PWRDN programmable.."

•

Update Section 5.12: Specify Input voltage range of VCC7

•

Update Section 5.13: Add discharge resistance

•

Update Section 5.14:

•

Add DC output voltage maximum value

•

Add discharge resistance

•

Update VGAIN_SEL test conditions and typ value

•

Update Section 5.15:

•

Add DC output voltage maximum value

•

Add discharge resistance

•

Update VGAIN_SEL test conditions

•

Update Section 5.16: Add tablenote to Rated output current 6000 mA

•

Update Section 5.21.2:

•

Update introductory statement

•

Add note to Figure 5-1

•

Align Parameters in Table 5-3 with Figure 5-1

•

Update Section 5.21.3: Add note toFigure 5-2

•

Update Section 4: Add J3 to AGND in

•

Update Section 6:

•

Update Table 6-1: VDD1 and VDD2 voltages

•

Device POWER ON enable conditions: Add additional device power enable condition

•

Device SLEEP enable conditions: Replace "... keeping the SLEEP signal floating, or ..." with "... keeping the SLEEP signal in the

active polarity state, or..."

•

Device reset scenarios: Replace "VCC7 < VBNPR" with " VDD7 < VBNPR and BB < VBNPR"

•

Update introduction for Table 6-2

•

Update Table 6-2: Remove all values in EEPROM Boot column

•

Update Table 6-3:

•

Remove all values in EEPROM Boot column

•

Update INT_MSK_REG.VMBHI_MSK description

•

Update Package Thermal Characteristics: Pin count from 96 to 98

•

Update Section 6.15.1:

•

Update Table 6-37, Table 6-38, Table 6-40, and Table 6-41: SEL bit description

•

Update Table 6-67: Update VMBHI_IT_MSK bit description

•

Update Table 6-80: Update GPIO_SEL bit description - Replace LED1 out with PWM out

(6)

TPS65911 Data Manual, SWCS049E - Version E: Update Packaging Information.

(7)

TPS65911 Data Manual, SWCS049F - Version F:

•

Add Section 7.2.4.1.

•

Update Table 6-67: Update bit 1, VMBHI_IT_MSK description.

•

Update Section 6.5.1: Device reset scenarios: Replace "VDD7 < VBNPR" with " VCC7 < VBNPR"

•

Add Ordering Information.

SWCS049D

July 2011

See (5).

SWCS049E

July 2011

See (6).

SWCS049F

August 2011

See (7).

SWCS049A 数据表(PDF) 6 Page - Texas Instruments

SWCS049A 数据表(HTML) 6 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载