User Manual

22 of 33

Revision 1.6

2018-11-27

EVAL-M1-101T User Manual

iMOTION™ Modular Application Design Kit

Hardware description of EVAL-M1-101T

5.2.2

NTC shutdown value calculation and configuration

External NTC Temperature shutdown value can be calculated as shown below and configured in MCEWizard as

shown in Figure 18. For pull-up resistor on evaluation power board and NTC value, please refer to the power

board’s Application Note. The value of pull-up resistor on EVAL-M1-101T is 4.87 kΩ (see Figure 16).

For example, for EVAL-M1-CM610N3, the pull-up resistor on the power board is 5.6kΩ. So the total pull-up

resistance calculates to be 2.605kΩ.

setting temperature is 100°C, the shutdown value should be 2.22V.

Figure 18

External temperature sense input configuration in MCEWizard