User Manual

16 of 33

Revision 1.6

2018-11-27

EVAL-M1-101T User Manual

iMOTION™ Modular Application Design Kit

Getting Started with EVAL-M1-101T

Figure 9

Program Firmware and Parameter in “Program IMC Controller” pop-up window

To program only Drive System Parameter file into IMC101T-T038, click on “Tools” menu and select

“Programmer” in the pull down list. The pop-up window “Program IMC controller” will show up as in Figure 10.

Click on the “Program Parameters” radio button (this is the default option), and then select the Drive System

Parameter file created using MCEWizard by clicking on “Browse…”. Finally, click on the “Start” button to

program the parameter file into the IMC101T-T038 IC.

Figure 10 “Program IMC Controller” pop-up window

After Drive System Parameter file has been programmed into IMC101 controller, and the motor drive system is

powered, the MCEDesigner can be used to start/stop the motor, display motor current traces, change the motor

speed, modify drive parameters and many other functions. Please refer to the MCEDesigner documentation for

more details.