STA8090FG datasheet(21/41 Pages) STMICROELECTRONICS

21 / 41 page

DS10719 Rev 6

21/41

STA8090FG

General description

SSP features

The SSP has the following features:



Parallel-to-serial conversion on data written to an internal 32-bit wide, 32-location deep



transmit FIFO



Serial-to-parallel conversion on received data, buffering it in a 32-bit wide, 32-location



deep receive FIFO



Programmable data frame size from 4 to 32 bits



Programmable clock bit rate and prescaler



Programmable clock phase and polarity in SPI mode

3.4.3

UART

The UARTx (x = 0|1|2) performs serial-to-parallel conversion on data asynchronously

received from a peripheral device on UARTx_RX pin, and parallel-to-serial conversion on

data written by CPU for transmission on UARTx_TX pin. The transmit and receive paths are

buffered with internal FIFO memories allowing up to 64 data byte for transmission, and 64

data byte with 4-bit status (break, frame, parity, and overrun) for receive.

UART features

The UARTx (x = 0|1|2) are Universal Asynchronous Receiver/Transmitter that support much

of the functionality of the industry-standard 16C650 UART. The main features are:



Programmable baud rates up to UARTCLK / 16 (1.5 Mbps with UARTCLK at 24 MHz),

or up to UARTCLK / 8 (3.0 Mbps with UARTCLK at 24 MHz), with fractional baud-rate

generator



5, 6, 7 or 8 bits of data



Even, odd, stick or no-parity bit generation and detection



1 or 2 stop bit generation



Support of the modem control functions CTS, RTS, plus DCD, DSR, RTS, DTS and RI

(UART0 only)



Support of software flow control using programmable Xon/Xoff characters



False start bit detection



Line break generation and detection



Separate 8-bit wide, 64-deep transmit FIFO and 12-bit wide, 64-deep receive FIFO



Programmable FIFO disabling for 1-byte depth data path

These UARTs vary from industry-standard 16C650 on some minor points which are:



Receive FIFO trigger levels



The internal register map address space, and the bit function of each register differ



The deltas of the modem status signals are not available



1.5 stop bits is not supported



Independent receive clock feature is not supported

STA8090FG 数据表(PDF) 21 Page - STMicroelectronics

STA8090FG 数据表(HTML) 21 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

数据表下载