STA8100GA datasheet(40/42 Pages) STMICROELECTRONICS

40 / 42 page

Revision history

STA8100GA

40/42

DS13006 Rev 4

29-Oct-2020

(contd.)

Figure 2: Device ballout:

– Replaced CAN0_RX and CAN0_TX with GPIO6 and

GPIO5 respectively.

– Replaced SPI_CS, SPI_SI, and SPI_SO with JTAG-

TMS, JTAG-TDI, and JTAG-TDO respectively.

– Replaced PPS_OUT, and SPI_CK with JTAG-TRSTn,

and JTAG-TCK respectively.

– Replaced SFC_ECS with GPIO67.

– Updated TP_IF_N, TP_IF_P, and EOUT0 with

TP_IF_N/ ANTSens1/ AIN0, P_IF_P/ ANTSens2/

AIN1, and PPS_OUT respectively.

– Updated footnote from “Balls all have alternate.......

functions A.” to “Balls all have......registers”.

Figure 4: LDO on-chip regulators dependencies:

updated

Figure 7: Clock block diagram: added

Section 3.2: RF front end (G5RF): Updated the text from

“The RF_IF chain..... 2-bit ADC.....(MAG) bit.” to “The

RF_IF..... 3-bit ADC......(MAG1, MAG0) bit”.

Section 3.5.2: APB bridge 1 peripherals: Removed mail

box and OTFDEC peripherals.

Section 3.16: Antenna sensing: Updated section

introduction paragraph.

Section 3.19: Reset:

Extensive update

Section 4.4: RTC 32.768 kHz oscillator specifications:

– Added section

Section 4.6: Digital interface AC timing characteristics

(specified by design): Updated the section title from

“Interface AC timing characteristics” to “Interface AC

timing characteristics (guaranteed by design).”

Section 4.6.5: USB - low speed and full speed mode:

Replaced “high” with “full”.

Removed sections related to Safety requirement,

Hyperbus, HSM, OTP and OTFDEC.

23-Nov-2020

Public version on STMicroelectronics site.

Updated Table 7: GNSS user cases.

Table 36. Document revision history (continued)

Date

Revision

Changes

STA8100GA 数据表(PDF) 40 Page - STMicroelectronics

STA8100GA 数据表(HTML) 40 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

数据表下载