MG-37

MGFS30

External view

GENERAL SPECIFICATIONS

ISOLATION

INPUT-OUTPUT

DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)

INPUT-CASE

DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)

OUTPUT-CASE

DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)

ENVIRONMENT

OPERATINGTEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max

STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max

VIBRATION

10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis

IMPACT

490.3m/s2 (50G), 11ms, once each along X, Y and Z axis

SAFETY

AGENCY APPROVALS

UL60950-1, C-UL, EN60950-1

OTHERS

CASE SIZE/WEIGHT

25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max

COOLING METHOD

Convection/Forced air

*1

MGFW30xx05/MGFW30xx12/MGFW30xx15 is available as single output, +10V/+24V/+30V

*2

Rated input 12V, 24V or 48V DC lo=100%

*3

Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope)

*4

Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.

*5

Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.

*

Parallel operation with other model is not possible.

(TOP VIEW)

¶

Recommended Pad and Hole dia.

¶ Tolerance ±0.5 [±0.02]

¶ Dimensions in mm, [ ]=inches

¶ Pin terminal material : Copper

¶ Plating treatment of terminal : Lead free plating

¶ Case material : Brass

¶ Plating treatment of case : Nickel plating

¶ Bottom Cover : FR4 (t=0.6) [t=0.024]

¶ Please keep enough creepage distance with the

pattern on PCB and other components.

¶ Weight 40g max

1±0.1

f

6-f1.5

Name Plate

+Vout

TRM

-Vout

+Vin

-Vin

RC

45.72

50.8

¶

¶

Unit : 0.1inch

Dimension : mm

Case

Bottom Cover

[1.8]

[2.0]