MG-39

MGFS40

External view

GENERAL SPECIFICATIONS

ISOLATION

INPUT-OUTPUT

DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)

INPUT-CASE

DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)

OUTPUT-CASE

DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)

ENVIRONMENT

OPERATINGTEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 5,000m (16,400feet) max

STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max

VIBRATION

10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis

IMPACT

490.3m/s2 (50G), 11ms, once each along X, Y and Z axis

SAFETY

AGENCY APPROVALS

UL62368-1, C-UL(CSA62368-1), EN62368-1

OTHERS

CASE SIZE/WEIGHT

25.4X9.9X25.4mm (WXHXD) / 30g max

COOLING METHOD

Convection/Forced air

*1

MGFW40xx12/MGFW40xx15 is available as single output +24V/+30V

*2

Rated input voltage (DC5V, DC24V, DC48V) Io=100%

*3

Riple and Ripple Noise is measured by using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope)

*4

Drift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C

*5

Rated input voltage (DC5V, DC24V, DC48V), rated output wattage, ambient temperature at 25C

*

Parallel operation with other model is not possible.

(TOP VIEW)

¶

Recommended Pad and Hole dia.

1±0.1

f

6-f1.5

Name Plate

¶

¶

Unit : 0.1inch

Dimension : mm

¶ Tolerance ±0.5 [±0.02]

¶ Dimensions in mm, [ ]=inches

¶ Pin terminal material : Copper

¶ Plating treatment of terminal : Lead free plating

¶ Case material : Brass

¶ Plating treatment of case : Nickel plating

¶ Bottom Cover : FR4 (t=0.6) [t=0.024]

¶ Please keep enough creepage distance with the

pattern on PCB and other components.

¶ Weight 30g max

+

Vin

-

Vin

RC

+Vout

-Vout

TRM

25.4

20.32

Case

Bottom Cover

[0.8]

[1.0]