T56

www.vishay.com

Vishay Polytech

Revision: 28-Nov-2022

6

Document Number: 40219

For technical questions, contact: polytech@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Test temperature and test conditions, please refer to table “Standard Ratings”

PERFORMANCE CHARACTERISTICS

ITEM

CONDITION

POST TEST PERFORMANCE

Life test

2000 h application of rated voltage at 105 °C (1),

2000 h application of 2/3 rated voltage at 125 °C (1),

MIL-STD-202 method 108

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limits

Leakage current

Shall not exceed 300 % of initial limit

Shelf life test

2000 h no voltage applied at 105 °C (1),

2000 h no voltage applied at 125 °C (1),

MIL-STD-202 method 108

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limits

Leakage current

Shall not exceed 300 % of initial limit

Humidity tests

At 60 °C / 90 % RH 500 h, no voltage applied (1)

At 85 °C / 85 % RH 500 h, rated voltage applied (1)

Capacitance change

-5 % to +50 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

Resistance

to solder heat

MIL-STD-202, method 210, condition J

(SnPb capacitors) and K (Pb-free capacitors)

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

Stability at low and

high temperatures

-55 °C

Capacitance change

Within -30 % to 0 % of initial value

Dissipation factor

Shall not exceed 150 % of initial limit

Leakage current

n/a

25 °C

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Within initial limit

85 °C

Capacitance change

Within -50 % to +30 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 1000 % of initial value

105 °C / 125 °C (1)

Capacitance change

Within 0 % to +50 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 1000 % of initial limit

Surge voltage

105 °C, 1000 successive test cycles at 1.3 of rated

voltage in series with a 33

Ω resistor at

the rate of 30 s ON, 30 s OFF

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

Shock

(specified pulse)

MIL-STD-202, method 213, condition I,

100 g peak

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Vibration

MIL-STD-202, method 204, condition D,

10 Hz to 2000 Hz 20 g peak

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

There shall be no mechanical or visual damage to capacitors

post-conditioning.

Shear test

Apply a pressure load of 5 N for 10 s ± 1 s

horizontally to the center of capacitor side body

Capacitance change

Within ± 20 % of initial value

Dissipation factor

Within initial limit

Leakage current

Shall not exceed 300 % of initial limit

PRODUCT INFORMATION

Polymer Guide

www.vishay.com/doc?40076

Moisture Sensitivity

www.vishay.com/doc?40135

Infographic

www.vishay.com/doc?48084

Sample Board

www.vishay.com/doc?48073

FAQ

Frequently Asked Questions

www.vishay.com/doc?42106