CERAMIC CAPACITORS

147

info@exxelia.com

www.exxelia.com

General characteristics

Page revised 06/20

FEATURES

• Lowest ESR in class, High Self-Resonant Frequencies,

RF capacitors

• Highest working voltage in class: 1,500V

• Standard EIA sizes: 0402 - 1111

• Capacitance range: 0.1pF - 1,000pF

• NPO, RoHS & REACH compliant

• Operating temperature up to 125°C*

• Laser Marked (optional)

APPLICATIONS

• Cellular Base Station Equipments

• Broadband Wireless Service

• Point to Point / Multipoint Radios

• RF Generators (NMR…)

CIRCUIT APPLICATIONS

• Filter Networks

• Matching Networks

• Tuning, Coupling and DC Blocking

PHYSICAL CHARACTERISTICS

• Chip capacitors for surface mounting with:

- Copper barrier and tinning or Silver/Palladium

(non magnetic)

- Nickel barrier and tinning

• Ribbon leads for surface mounting

ELECTRICAL AND ENVIRONMENTAL SPECIFICATIONS

Electrical specifications

Parameter

Value

Capacitance

0.2pF - 1,000pF

Tolerances

A, B, C, D below 10pF

F, G, J, K above 10pF

Working voltage (WVDC)

See capacitance range chart

Temperature coefficient

0 ±30ppm/°C, –55°C to +125°C

For SHF and SHS: 0 ±30ppm/°C, –55°C to +150°C

Insulation Resistance

105 MΩ min.

Dielectric Withstanding

(test voltage applied for 5 seconds)

2.5 x WVDC for WVDC ≤ 500V

1.8 x WVDC for extended range values ≥ 820pF

1.5 x WVDC for WVDC > 500V

Aging

none

Piezo Effect

none

Environmental specifications

Parameter

Value

Life Test

2,000 hours, +125°C at 2 x WVDC (standard WVDC range)

And SHB up to 100pF: 1,000 hours, 175°C at 500V

Moisture Resistance Test 1

240 hours, 85% relative humidity at 85°C

(ESA/SCC n°3009)

Moisture Resistance Test 2

56 days, 93% relative humidity at 40°C

0V, 5V, WVDC

* The temperature range for the SHB up to 100pF is upgrated from +125°C to +175°C.

The temperature withstanding for SHF and SHS is 150°C for the whole capacitance range.

HOW TO ORDER

501

SH

B

100

J

S

-

L

E

-RoHS

Voltage code

Dielectric

Size code

Capacitance code

Tolerance code

Termination code

Ribbon code

Marking code

Tape and reel

250 = 25V

500 = 50V

101 = 100V

201 = 200V

251 = 250V

301 = 300V

501 = 500V

601 = 600V

102 = 1,000V

152 = 1,500V

Please refer to voltage given

in capacitance range chart

SH =

NPO:

(0±30)

ppm/°C

L = 0402

S = 0603

A = 0505

F = 0805

N = 1206

T = 1210

B = 1111

Please refer to Cap.

Code given in

capacitance range

chart.

A = ±0.05pF

B = ±0.1pF

C = ±0.25pF

D = ±0.5pF

F = ±1%

G = ±2%

J = ±5%

K = ±10%

See note 1

S = Standard:

tin-plated nickel

Available on sizes 0505,

0603 and 1111:

C = Non-magnetic:

tin-plated copper

Available on sizes 0505,

0805 (from 0.5pF to 150pF,

consult us for higher cap.

value), 1206 and 1210:

A = Non-magnetic:

silver/palladium

See note 2

-: no lead or ribbon

Available on size

1111:

1 = Micro-strip

ribbons

6 = Radial Wires

See note 3

-: no marking

Available on sizes

0505 and 1111:

L = laser marking

-: no tape and reel

E = Tape and reel

packaging

Number of compo-

nents per reel:

SHL: 10,000

SHA: 3,000

SHS: 4,000

SHF: 4,000

SHN: 3,000

SHT: 3,000

SHB: 1,000

The RoHS tag is

not part of the

reference

Tag added at the

end of P/N

for information

Note 1: For capacitance values less than 10pF, tolerances B, C and D available. Tolerance code A available for: L case for capacitance values of 0.2pF - 1.9pF. A case for capacitance values of 0.2pF - 4.7pF. S case for capacitance values of 0.2pF -

9.1pF. F case for capacitance values of 0.3pF - 2.2pF. N case for capacitance values of 0.5pF - 1.8pF. B case for capacitance values of 0.2pF - 3.3pF. For capacitance values of 10pF or higher, tolerances F, G, J and K available.

Note 2: All terminations are backward compatible and lead-free. The non-magnetic terminations are all Magnetism-free Rated.

Note 3: When coding ribbons for the description of the part, the termination has to be mentioned for MR certified types to ensure that only non-magnetic materials are used.

Note 4: Ribbon lead styles capacitors are not available in Tape and Reel.

Examples: 501 SHB 470 J1L any termination material could be used. 501 SHB 470 JC1L only non-magnetic termination materials could be used. Please consult us for specific requirements.

Capacitance

Breakdown voltage Vpeak (V)

15 pF

2700

39 pF

2000

100 pF

1400

Typical Breakdown Voltage SHB 45 MHz DC = 1%

Super HiQ

SH Series