 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
STM32G0C1NET3XTR 数据表(PDF) 68 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32G0C1NET3XTR 数据表(HTML) 68 Page - STMicroelectronics |
|
|
68 / 159 page  Electrical characteristics STM32G0C1xC/xE 68/159 DS13564 Rev 4 5.3 Operating conditions 5.3.1 General operating conditions Table 22. Current characteristics Symbol Ratings Max Unit IVDD/VDDA /VDDIO2 Current into VDD/VDDA/VDDIO2 power pin (source)(1) 100 mA IVSS/VSSA Current out of VSS/VSSA ground pin (sink)(1) 100 IIO(PIN) Output current sunk by any I/O and control pin except FT_f 15 Output current sunk by any FT_f pin 20 Output current sourced by any I/O and control pin 15 ∑IIO(PIN) Total output current sunk by sum of all I/Os and control pins 80 Total output current sourced by sum of all I/Os and control pins 80 IINJ(PIN) (2) Injected current on a FT_xx pin -5 / NA(3) Injected current on a TT_a pin(4) -5 / 0 ∑|IINJ(PIN)| Total injected current (sum of all I/Os and control pins)(5) 25 1. All main power (VDD/VDDA/VDDIO2, VBAT) and ground (VSS/VSSA) pins must always be connected to the external power supplies, in the permitted range. 2. A positive injection is induced by VIN > VDDIOx while a negative injection is induced by VIN < VSS. IINJ(PIN) must never be exceeded. Refer also to Table 21: Voltage characteristics for the maximum allowed input voltage values. 3. Positive injection is not possible on these I/Os and does not occur for input voltages lower than the specified maximum value. 4. On these I/Os, any current injection disturbs the analog performances of the device. 5. When several inputs are submitted to a current injection, the maximum ∑|IINJ(PIN)| is the absolute sum of the negative injected currents (instantaneous values). Table 23. Thermal characteristics Symbol Ratings Value Unit TSTG Storage temperature range -65 to +150 °C TJ Maximum junction temperature 150 °C Table 24. General operating conditions Symbol Parameter Conditions Min Max Unit fHCLK Internal AHB clock frequency - 0 64 MHz fPCLK Internal APB clock frequency - 0 64 VDD Standard operating voltage - 1.7(1) 3.6 V VDDIO2 External supply voltage for selected I/Os -1.7 3.6 V |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
