 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
P87LPC767FD 数据表(PDF) 19 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
P87LPC767FD 数据表(HTML) 19 Page - NXP Semiconductors |
|
|
19 / 60 page  Philips Semiconductors Product data 87LPC767 Low power, low price, low pin count (20 pin) microcontroller with 4-kbyte OTP and 8-bit A/D converter 2001 Aug 07 16 BIT SYMBOL FUNCTION I2CON.7 RDAT Read: the most recently received data bit. “ CXA Write: clears the transmit active flag. I2CON.6 ATN Read: ATN = 1 if any of the flags DRDY, ARL, STP, or STP = 1. “ IDLE Write: in the I2C slave mode, writing a 1 to this bit causes the I2C hardware to ignore the bus until it is needed again. I2CON.5 DRDY Read: Data Ready flag, set when there is a rising edge on SCL. “ CDR Write: writing a 1 to this bit clears the DRDY flag. I2CON.4 ARL Read: Arbitration Loss flag, set when arbitration is lost while in the transmit mode. “ CARL Write: writing a 1 to this bit clears the CARL flag. I2CON.3 STR Read: Start flag, set when a start condition is detected at a master or non-idle slave. “ CSTR Write: writing a 1 to this bit clears the STR flag. I2CON.2 STP Read: Stop flag, set when a stop condition is detected at a master or non-idle slave. “ CSTP Write: writing a 1 to this bit clears the STP flag. I2CON.1 MASTER Read: indicates whether this device is currently as bus master. “ XSTR Write: writing a 1 to this bit causes a repeated start condition to be generated. I2CON.0 — Read: undefined. “ XSTP Write: writing a 1 to this bit causes a stop condition to be generated. * Due to the manner in which bit addressing is implemented in the 80C51 family, the I2CON register should never be altered by use of the SETB, CLR, CPL, MOV (bit), or JBC instructions. This is due to the fact that read and write functions of this register are different. Testing of I2CON bits via the JB and JNB instructions is supported. — SU01155 MASTER STP STR ARL DRDY ATN RDAT 0 1 2 3 4 5 6 7 I2CON Reset Value: 81h Bit Addressable* Address: D8h XSTP XSTR CSTP CSTR CARL CDR IDLE CXA READ WRITE Figure 8. I2C Control Register (I2CON) BIT SYMBOL FUNCTION I2DAT.7 RDAT Read: the most recently received data bit, captured from SDA at every rising edge of SCL. Reading I2DAT also clears DRDY and the Transmit Active state. “ XDAT Write: sets the data for the next transmitted bit. Writing I2DAT also clears DRDY and sets the Transmit Active state. I2DAT.6–0 – Unused. — SU01156 — — — — — — RDAT 0 1 2 3 4 5 6 7 I2DAT Reset Value: xxh Not Bit Addressable Address: D9h — — — — — — — XDAT READ WRITE Figure 9. I2C Data Register (I2DAT) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
