ELECTRONICS

FCI Electronics

Manual Part No. 415988-001

Issued: Date (03/12/99)

Page 8 of 18

Rev. 05/07/01 ECR V10337

Revision B

K\DCU\Manuals

•

• Check that the spring was not dislodged from the disconnect (box) portion of the terminal.

• Check that the wire barrel seam is even and tightly closed.

Figure 4. Correctly Crimped Terminal

Next, obtain a crimp height micrometer and measure the areas of the terminal shown in Figure 5.

If the crimp heights do not meet the specifications listed in “Specifications” on page 5, refer to the

section for proper adjustment procedures of crimp height on page 15.

Figure 5. Measuring Crimp Height of Terminal

PDM: Rev:B

Released

STATUS:

Printed: Dec 19, 2002