| 数据搜索系统,热门电子元器件搜索 |
|
MPC8347 数据表(PDF) 104 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8347 数据表(HTML) 104 Page - Freescale Semiconductor, Inc |
|
104 / 108 page ![]() MPC8347EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 3 104 Freescale Semiconductor Document Revision History 22 Document Revision History Table 66 provides a revision history of this document. 23 Ordering Information This section presents ordering information for the device discussed in this document, and it shows an example of how the parts are marked. The information in this document is accurate for revision 3.x silicon and later (in other words, for devices with part numbers ending in A or B, such as the MPC8347EA or MPC8347EB). For information on revision 1.1 silicon and earlier versions (MPC8347E/MPC8347), see the PowerQUICC™ II Pro Integrated Host Processor Hardware Specifications 23.1 Part Numbers Fully Addressed by this Document Table 67 shows an analysis of the Freescale part numbering nomenclature for the MPC8347EA. The individual part numbers correspond to a maximum processor core frequency. For available frequencies, contact your local Freescale sales office. Also the part numbering scheme includes an application modifier Table 69. Document Revision History Revision Date Substantive Change(s) 3 11/2006 Updated note in introduction. In Table 5, “MPC8347EA Typical I/O Power Dissipation,” added GVDD 1.8-V values for DDR2; added table footnote to designate rates that apply only to the TBGA package. In the features list in Section 1, “Overview,” corrected DDR data rate to show: • 266 MHz for PBGA parts for all silicon revisions 400 MHz for DDR2 for TBGA parts for silicon Rev. 2 and 3In Section 23, “Ordering Information,” replicated note from document introduction. 2 8/2006 Changed all references to revision 2.0 silicon to revision 3.0 silicon. Changed VIH minimum value in Table 39, “JTAG Interface DC Electrical Characteristics,” to OVDD –0.3. In Table 63, “Suggested PLL Configurations,” deleted reference-number rows 902 and 703. In Table 40, “PCI DC Electrical Characteristics,” changed high-level input voltage values to min = 2 and max = OVDD + 0.3; changed low-level input voltage values to min = (–0.3) and max = 0.8. In Table 44, “PCI DC Electrical Characteristics,” changed high-level input voltage values to min = 2 and max = OVDD + 0.3; changed low-level input voltage values to min = (–0.3) and max = 0.8. Updated DDR2 I/O power values in Table 5, “MPC8347EA Typical I/O Power Dissipation.” 1 4/2006 Removed Table 20, “Timing Parameters for DDR2-400.” Changed ADDR/CMD to ADDR/CMD/MODT in Table 9, “DDR and DDR2 SDRAM Output AC Timing Specifications,” rows 2 and 3, and in Figure 2, “DDR SDRAM Output Timing Diagram. Changed Min and Max values for VIH and VIL in Table 40,“PCI DC Electrical Characteristics.” In Table 51, “MPC8347EA (TBGA) Pinout Listing,” and Table 52, “MPC8347EA (PBGA) Pinout Listing,” modified rows for MDICO and MDIC1 signals and added note “It is recommended that MDICO be tied to GRD using an 18 Ω resistor and MCIC1 be tied to DDR power using an 18 Ω resistor.” In Table 51, “MPC8347EA (TBGA) Pinout Listing,” and Table 52, “MPC8347EA (PBGA) Pinout Listing,” in row AVDD3 changed power supply from “AVDD3” to “—.” 0 3/2006 Initial Release |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |